High Quality, Ready-To-Press Full-Color Custom-Printed DTF Transfer Gang Sheets
Experience the ultimate in custom sublimation with our high-quality, ready-to-press full-color Custom-Printed DTF Transfer Gang Sheets. Printed on our brand new EPSON DTF MACHINE, these sheets offer an exceptionally wide color gamut, delivering vibrant and precise designs for all your DTF projects.
Looking for DTF gang sheets longer than 30 feet, simply change the quantity to "2" and now you have a 60 foot gang sheet! Your can be printed on our gang sheets, so all you need is a heat press.
TURNAROUND TIME: 24 hours excluding holidays/weekends
FILES:
PNG, AI, accepted, vector files are always preferred, raster art should be at least 300 DPI.
Tip: If you're using Canva or Procreate, we recommend exporting your documents as PNG
-
RECOMMENDATIONS
Do not upload mirrored images.
- To ensure your DTF transfer looks professionally pressed every time, follow these four simple steps.
SIMPL GUIDE.
1. Position Your Design in the desired location and make sure you are not pressing over large wrinkles. Heat-resistant tape is recommended when pressing on hats or when using a household iron to prevent the transfer from moving. You'll learn when it's needed with experience
2. Press the transfer at 310°F / 155°C with medium to high pressure for 13 seconds.
It is always recommended to test one piece first.
Use a Garment Protector to protect your garment from touching the iron directly. You cannot damage the transfer by pressing with more heat, pressure, or time, however, it could scorch the garment
If your settings are scorching the garment, the first step would be to reduce pressure. If that doesn’t work, retain the reduced pressure and reduce the heat by 10-15°F.
With a little practice, you’ll find the right settings for each garment and material.
3. Peel Hot After (5 seconds) Few Seconds
Stickers NY DTF, you can peel hot or cool. Wait a few seconds (or more) and peel! If parts of the design are not sticking, lay it back down and press again with added pressure and heat (+15°F). If unsuccessful, increase heat by 15°F increments until it works. Remember, the great thing about Stickers NY DTF, is that repeated pressing won't damage the transfer.
4. Final Press & Wash Instructions
Important: While the majority of other DTF companies advise you to press it just once, this is improper. After hundreds of wash tests, we have found that a final press is imperative to create a superior product.
After the design is transferred onto the garment, with the film peeled off, cover the design with provided parchment paper or a single layer of t-shirt material and press for ~15 seconds. By doing so, it enhances the value of your product by greatly improving the durability and softness as well as reducing the shine. For a glossy look, use a guard sheet for the second and final press instead. For best results and longevity, wash the garment inside out in cold water and dry on low heat or hang to dry. Washing it with standard settings is fine, but it lasts longer with more delicate settings.
